| |
NetCamCenter Special Single Camera Edition
Ideal for recording network camera and video server.
|
| |
 |
| License | Price
|
| Special Single Camera Edition (Online only) * | $49
|
|
Enhanced digital video recording
|
-
Auto deletes the oldest video file for you to recycle the hard disk space.
-
Playback video and monitor remotely while recording video.
- Recording mode: Normal, Schedule, or Alarm Recording.
- Supports various compression ratios that best suit your needs.
- Recording video format: Windows Media™, Webcam Corp NVC2
High quality video for realtime streaming (*1)
|
If you are using network cameras and NetCamCenter on LAN, you can use NetCamCenter's
Windows Media™ streaming feature to boost the remote viewing frame rate.
- Supports setting up multiple areas for motion detection.
- Supports prealarm recording.
- Mark the motion detected areas to see the moving object easily.
- Trigger the following actions when motion is detected.
- Email notification with captured images
- Play an alarm sound to deter the intruder.
- Create alarm log to record the date and time when motion is detected.
- Launch external program.
- Set external output to On or Off (This feature is device dependent.)
|
Supports camera input and output controls |
Activate the following actions when GPIO input is triggered. (This feature is device dependent.
Click here to see which devices are supported.)
- Email notification with captured images
- Play an alarm sound to deter the intruder.
- Create alarm log to record the date and time when motion is detected.
- Launch external program.
- Set external output to On or Off
You can setup username and password to control the web access. (*2)
-
Flip video horizontally or vertically.
- Adjust brightness and contrast.
-
Turn color image to black and white.
|
Zoom in a video zone selected
|
You can drag and select a rectangle on NetCamCenter to zoom in.
|
Run NetCamCenter as a Windows Service
|
With NetCamCenter, you can schedule video recording or motion detection.
(This feature is network camera dependent.)
-
Allows you to adjust the position of your camera. Simply click on
arrow key to control the camera.
- PTZ cruise
If your network camera supports preset,
you can program the preset positions to be called in a set of sequence with NetCamCenter.
|
|
|
Monitor your camera from your Pocket PC
|
|
Enables you to monitor on Pocket PC. You can watch the remote video clip on your network ready Pocket PC!
|  |
- Control network PTZ camera through the built-in web server.
- Supports remote viewing with IE.
- Remote video playback by Windows Media Player.
-
Search video archive by date with streaming video playback.
-
Allow adjusting brightness and contrast on remote viewing.
-
Allow turning color image to black and white on remote viewing.
-
Allow saving frames.
-
Supports zoom to 150%, 200% and full screen.
|
Click to enlarge
|
|
Uploads images to your web site
|
You can put timestamp or text string on top of your video with this caption feature.
|
128 bit file fingerprint assure the video file is authentic
|
NetCamCenter can generate 128 bit file fingerprint for each video file.
Software requirements
- Microsoft Windows XP/2003/Vista(32-bit) operating system
- Microsoft Internet Explorer 6.0 or above
- Service Pack 2 for XP
- Windows Media™ Player 10 or above
for Windows XP. (Windows Media™ Player 9 is required for some features,
e.g. 10x fast forward playback)
- MPEG4 and H.264 codec (Required to view video recorded with MPEG4 and H.264
codec. You can download and purchase MPEG4 decoder filter from 3ivx or
DivX, H264 from Axis or CoreAVC.)
| Hardware requirements
- CPU: Intel Pentium 4 2.0 GHz processor or above. The more cameras you have,
the more computer resources are needed. (e.g. CPU cycles, memory, hard drive
space ...etc.) For better performance, Intel multicore processors (Pentium
D, Core 2 Duo, Core 2 Quad) are recommended. NetCamCenter is optimized for
Intel processors.
- 128 MB RAM or above
- A network card
- at least 20GB hard drive recommended for video recording
- Internet connection is required for remote access
|
Remote Viewing Requirements
- Windows Media™ Player 9
- Microsoft Internet Explorer 5.0 or above
- To view the broadcasting by PDA, Pocket PC 2003 or Windows Mobile 5 is required.
- Webcam Corp NVC2 (Required to view video recorded with NVC2 codec.)
- MPEG4 and H.264 codec (Required to view video recorded with MPEG4 and H.264
codec. You can download and purchase MPEG4 decoder filter from 3ivx or
DivX, H264 from Axis or CoreAVC.)
|
This product requires computer professional with sufficient network and video skills to install.
Note:
| 1. |
Viewing by Windows Media streaming is limited to 10 concurrent connections.
|
| 2. |
Authentication is not available if accessed directly by Windows Media Player and Windows Media server.
|
| 3. |
To fast forward video, Windows Media Player 9 and XP is required.
|
| 4. |
NetCamCenter Single Camera Edition does not support
- multiple cameras
-
Limited error recovery
|
- Price and specifications are subject to change without notice.
Copyright ©2008 Webcam Corp. All rights reserved.
All trademarks are owned by respective company.
|
|
4XEM
