Products       Downloads       Demo       Support       Partnership       Contact Us

Hardware   Multi-Camera Remote   Surveillance   Video capture card   Security Cameras     C/CS mount camera     Dome camera     IR bullet camera     Lens   Accessories     Mounting brackets     Housing     Cable     Connector     Power supply  How-to Guide

BC602/BC062A Hi Quality CCD camera Instruction Manual Top Tripod Mounting Bracket Screw Hole. Used to fix Tripod mounting bracket on the top of the camera. Bottom To install the bracket on the top of the camera, remove the tripod and fix it on the Top. You must use the supplied screw or the equivalent. If not, the bracket may not fixed properly. Back Front BC602 without Lens adapter. Lens adapter from "CS" Lens to "C" Ring 1. Determine location of installation. Install the mounting bracket first. 2. Install auto iris lens connector Connect the lens cable to the auto iris lens connector on the side of the camera. 3. Mounting the Lens Mount the lens by turning it clockwise on the lens mount of the camera. 4. Adjust the focus Loosen the screw on the flange-back adjusting ring if there is a screw on the lens. Turn the flange-back adjusting ring to the desired position. Tighten the screw on the flange-back adjusting ring. (Note: please remove the lens adapter for C Lens and mount the Lens to the camera directly, if the video is blur. ) 5. Install the camera on the bracket. Connect the video cable to the BNC connector and power cable to the power input.